Residential Renewable Energy

, a DC motor magnets run completely in the long run?

a DC motor has magnets on the outside and an electromagnetic rotor in the center, why confused cannot permanent magnets instead of electro-copper rotor energy to be used for free?

Imagine the constant magnent motor you describe in your Question focused on a bench, so the north pole of the magnet at the top or 12 clock position and the south pole at the bottom or 6 clock position. The windings in the rotor are DC by the brush and the commutator ring fed the magnetic field set in the rotor is approximately the same with the north pole up or 12 clock position and the south pole at the bottom or 6 clock position. The two north poles and two south poles directly facing each other. In magnetism same poles repel opposite poles attract, so that the rotor turns, the North Pole the coil moves away from the fixed pole of the permanent magnet. But as the copper pick ups on the commutator ring, move the brush and the next section of the rotor winding is moved to the connected brush gear. The rotor magnetic field re-instated in the same position relative to the fixed magnetic field. Rejection happens again and again a Rotation. In other words, the rotor has a series of turns that are only under tension and produces magnetism when a line with the brush gear. If we replace the rotor windings was fixed with a magnet and its starting point would be fixed to the outer rotor and the North Pole North Pole on 12 clock position of the rotor 180 degrees and stop the rotor south pole would now relative to the fixed north pole and the rotor north pole would be opposed to the fixed pole. The attraction between opposite poles of the rotor would in a to maintain fixed position and no rotation was possible. This principle is in the step motor is used where a fixed rotor is surrounded by a number of field coils on one and can be turned to generate incremental rotation with high accuracy.

Magnet motor, free energy, overunity test 2

I have some information that you’re going to love! There is an information product available on the internet that will explain how the average homeowner can build and install their own independent power source and achieve complete energy efficiency! We’re talking about a magnetic power generator that creates zero cost electricity, and doesn’t rely on mother nature (ie. wind or solar energy). When installed and functioning, these magnetic generators create their own energy and they’ll power your home for free! Plus…you may be eligible for residential renewable energy tax credit! Read the rest of the article here: DIY Magnetic Generator